Airline codes

This is a list of airline codes. The table lists the IATA airline designators, the ICAO airline designators and the airline call signs (telephony designator). Historical assignments are also included.

Airline codes for airlines beginning with:

All - 0-9 - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z

Contents

IATA airline designator

IATA airline designators, sometimes called IATA reservation codes, are two-character codes assigned by the International Air Transport Association (IATA) to the world's airlines. The standard is described in IATA's twice-annual publication, the Standard Schedules Information Manual. Airline designator codes are of the format "xx(a)", i.e. two alpha-numeric characters followed by an optional alpha character. Although the IATA standard provides for three-character airline designators, IATA has not used the optional third character in any assigned code. This is because some legacy computer systems, especially the "central reservations systems", have failed to comply with the standard, notwithstanding the fact that it has been in place for 20 years. The codes issued to date comply with IATA Resolution 762, which provides for only two characters. These codes thus comply with the airline designator standard but use only a limited subset of its possible range.

A flight designator comprises the airline designator, "xx(a)", plus the numeric flight number, "n(n)(n)(n)", plus an optional, so-called, "operational suffix" being one alpha character, "(a)". The full format of a flight designator is thus: "xx(a)n(n)(n)(n)(a)".

Designators are used to identify an airline for commercial purposes, including reservations, timetables, tickets, tariffs, air waybills and in airline interline telecommunications. There are three types of designator: unique, numeric/alpha and controlled duplicate.

Note that, since 1967, ICAO has also issued airline identification codes. ICAO codes are three characters in length. For many years, IATA has let it be known that they are "about" to adopt the ICAO codes as IATA airline designators. This has never occurred and IATA has made no statement about if they intend to do so.

After an airline is delisted, IATA can make the code available for reuse after six months and can issue "controlled duplicates". Controlled duplicates are issued to regional airlines whose destinations are not likely to overlap, so that the same code is shared by two airlines. The controlled duplicate is denoted here with an asterisk (*) following the code and in IATA literature as well.

IATA also issues an accounting or prefix code. This number is used on tickets as the first three characters of the ticket number.

ICAO airline designator

The ICAO airline designator is a code assigned by the International Civil Aviation Organization (ICAO) to aircraft operating agencies, aeronautical authorities and services. The codes are unique by airline which is not true for the IATA airline designator codes.

Each aircraft operating agency, aeronautical authority and services related to international aviation is allocated both a three-letter designator and a telephony designator. The designators are listed in ICAO Document 8585: Designators for Aircraft Operating Agencies, Aeronautical Authorities and Services.

An example is:

Certain combinations of letters are not allocated to avoid confusion with other systems (for example SOS). Other designators particularly those starting with Y and Z are reserved for government organizations.

Designator YYY is used for operators that do not have a code allocated.

Call signs (Flight identification or flight ID)

Most airlines employ a call sign that is normally spoken during airband radio transmissions. As by ICAO Annex 10 chapter 5.2.1.7.2.1 a call sign shall be one of the following types:

Type A – the characters corresponding to the registration marking of the aircraft

Type B – the telephony designator of the aircraft operating agency, followed by the last four characters of the registration marking of the aircraft

Type C – the telephony designator of the aircraft operating agency, followed by the flight identification

The one most widely used within commercial aviation is type C. The flight identification is very often the same as the flight number, though this is not always the case. In case of call sign confusion a different flight identification can be chosen, the flight number will remain the same. Call sign confusion happens when two or more flights with similar flight numbers fly close to each other, e.g., KL645 and KL649 or BA466 and BA646.

The flight number is published in an airlines public timetable and appears on the arrivals and departure screens in the airport terminals. In cases of emergency, the airline name and flight number, rather than the call sign, are normally mentioned by the main news media.

Some call signs are less obviously associated with a particular airline than others. This might be for historic reasons, or possibly to avoid confusion with a call sign used by an established airline.

Companies' names will change, normally due to bankruptcies or mergers. Country names can also change over time and new call signs may be agreed in substitution for traditional ones. The country shown alongside an airline's call sign is that wherein most of its aircraft are believed to be registered, which may not always be the same as the country in which the firm is officially incorporated or registered. There are many other airlines in business whose radio call signs are more obviously derived from the trading name.

The callsign should ideally resemble the operators name or function and not be confused with callsigns used by other operators. The callsign should be easily and phonetically pronounceable in at least English, French, Spanish or Russian.

References

See also

External links